1:17 AM
It is never easy to have a fridge which ice maker is not working properly as it should suppose to be. The first thought that comes to mind when experiencing would be to send it for repair or have it completely replaced with a new refrigerator model. True that ice maker repair Atlanta has the excellent means of service when it comes to these scenarios but there may just be something an owner can still do to help themselves the penny and fix what is broken through some self help procedures that are definitely of great use.
Before beginning the self help procedure o fixing an ice maker, make sure that it is turned off. Safety must always come first, no one wants to get electrocuted or be in some sort of accident. Switch the selector down to off option. Once everything are powered down, it is now time to get into the main action.
Start with the ice fridge door and notice that there is or there are hinge pins on it. Have them removed, there are instance where a bracket got only one pin but often times an individual would see two of them. After the pins are successfully taken off the court, place them somewhere safe and be sure to remember where it is.
Normally, a hex screw will be spotted at the part where the tray is located, have the shelf pulled out and there would be another set of screw that locks its back. Now remove all of those carefully. When all set f screws are taken away then put it at the same place where the pin are kept safe so that it would never be misplaced too.
When trying to disconnect all wiring, keep in mind that infrared doors needs to be shut at all times while pulling the wires out. The step would be considered success once the old machine that has to be replaced is of sight already.
In removing it, do a flipping in an up and down motion to allow its removal to get easier. Unscrew those three hex screws using an appropriate screwdriver and push in the tabs attached to completely make the harness fall out. The dysfunctional ice maker can then be disposed because it no longer would be of any use in the future. Do not lose all the screws that are removed, though.
Now, focus on the new machine that is about to be of replacement for the old busted one. Place it and keep its position secured and tightly gripped. Lock the screws back to where it was before the dismantle. When everything has completely been screwed, go back to where the fridge was and time to put the machine inside.
Now, move on to standing if the new assembled machine and connect it to the wire harness. Be sure to lock it in. Carefully line the machine up and slide it backward till a snap can be heard. That would mean it was locked and properly attached to its tabs. Reinstall all the wire harness and screw them back into place as well as the hinge pin.
Now, congratulations the replacement has been successfully installed. Get ready to try whether the hard work paid off this time. If yes, then that is a good news and go have a cold drink as reward of all patience and hard work. However, if the problem still does occur then it would be great to ask professional help fro the expert repairmen.
Before beginning the self help procedure o fixing an ice maker, make sure that it is turned off. Safety must always come first, no one wants to get electrocuted or be in some sort of accident. Switch the selector down to off option. Once everything are powered down, it is now time to get into the main action.
Start with the ice fridge door and notice that there is or there are hinge pins on it. Have them removed, there are instance where a bracket got only one pin but often times an individual would see two of them. After the pins are successfully taken off the court, place them somewhere safe and be sure to remember where it is.
Normally, a hex screw will be spotted at the part where the tray is located, have the shelf pulled out and there would be another set of screw that locks its back. Now remove all of those carefully. When all set f screws are taken away then put it at the same place where the pin are kept safe so that it would never be misplaced too.
When trying to disconnect all wiring, keep in mind that infrared doors needs to be shut at all times while pulling the wires out. The step would be considered success once the old machine that has to be replaced is of sight already.
In removing it, do a flipping in an up and down motion to allow its removal to get easier. Unscrew those three hex screws using an appropriate screwdriver and push in the tabs attached to completely make the harness fall out. The dysfunctional ice maker can then be disposed because it no longer would be of any use in the future. Do not lose all the screws that are removed, though.
Now, focus on the new machine that is about to be of replacement for the old busted one. Place it and keep its position secured and tightly gripped. Lock the screws back to where it was before the dismantle. When everything has completely been screwed, go back to where the fridge was and time to put the machine inside.
Now, move on to standing if the new assembled machine and connect it to the wire harness. Be sure to lock it in. Carefully line the machine up and slide it backward till a snap can be heard. That would mean it was locked and properly attached to its tabs. Reinstall all the wire harness and screw them back into place as well as the hinge pin.
Now, congratulations the replacement has been successfully installed. Get ready to try whether the hard work paid off this time. If yes, then that is a good news and go have a cold drink as reward of all patience and hard work. However, if the problem still does occur then it would be great to ask professional help fro the expert repairmen.
About the Author:
You can find complete details about the advantages and benefits of using professional ice maker repair Atlanta services at http://www.allareaapplianceservice.com/refrigerator-ice-maker today.
0 commentaires:
Post a Comment